Tel

Description:
2″ Ratchet Strap Tie Down.
This 2″ ratchet strap works effectively by ratcheting down tightly over a load.
Specifically designed to hold loads that on truck, trailer, ship and other freight carrier.
A variety of available hardware fittings also makes 2″ ratchet straps versatile.
Options include S-hook, wire J hook, flat snap hook, grab hook etc.
2″ Ratchet Straps Tie Down—–Specification
| Overall Length (ft.) | End Fittings | Ratchet Type | Match | 
| 10,000 | 27 | Flat Hook | Long Wide Handle | 
| 30 | |||
| 10,000 | 27 | Narrow Wire Hook | Long Wide Handle | 
| 30 | |||
| 10,000 | 27 | Twisted Snap Hook | Long Wide Handle | 
| 30 | |||
| 10,000 | 27 | Chain Anchor | Long Wide Handle | 
| 30 | |||
| 10,000 | 27 | Grab Hook Anchor | Long Wide Handle | 
| 30 | |||
| 10,000 | 27 | Delta Ring | Long Wide Handle | 
| 30 | |||
| 10,000 | 27 | Flat Hook | Short Wide Handle | 
| 30 | |||
| 10,000 | 27 | Flat Hook | Standard Handle | 
| 30 | 
Note:
1) Never use as lifting sling.
2) Never twist a webbing.
3) Protect the webbing from sharp edges.
4) Chemical active environment can effect the strength of sling.
5) Polyester is resistant to acid, but affected by concentrated bases.